How do I choose a trailer tire?

In selecting tires for your trailer, buy the size, type and load range found on the trailer’s certification label or in the owner’s manual. Keep in mind that tires have a load rating that indicates the amount of weight they can carry safely. That includes toys, Igloo coolers and camping gear.

The Best Trailer Tires

  1. Carlisle Radial Trail HD Trailer Tire.
  2. Maxxis M8008 ST Radial Trailer Tire.
  3. Boat Trailer Utility White Spoke Trailer Wheels.
  4. ST 225/75r15 Freestar M-108 10 Ply E Load Radial Trailer Tire.
  5. Trailer King ST Radial Trailer Tire – 225/75r15 117l.
  6. 2 New Trailer Tires ST 205/75r14 8pr Load Rangd D.

what is the difference between a trailer tire and a regular tire? They have thick tread to maintain traction on slippery road and sharp turns. They are also designed to handle the higher speeds of highway driving. Trailer tires, on the other hand, are designed to be on a following vehicle. They have thicker sidewalls to handle debris and other objects that maybe projected at them.

Additionally, what load range tire do I need for my trailer?

Most boat trailer tires have a load range of B, C, or D. If a tire has load range C, it can carry 1,820 pounds. If it’s on a single-axle trailer, this means both tires can carry a total of 3,640 pounds, which includes the weight of the trailer, the boat, the engine, fuel, and anything else inside the boat.

How long should trailer tires last?

Three to five years is the expected life of a normal trailer tire. The suggestion from manufacturers is that after five years the RV trailer tires should be replaced regardless of the tire appearance or tread depth. Believe it or not, ST trailer tires are designed to not wear out.

Can you use regular car tires on a trailer?

An “LT” tire is the same rating as “ST” and can be used as such. Passenger car tires can be used, but the weight ratings are less. As far as I know, it is not illegal to use a passenger car tire on a trailer. Its not recommended, but it is legal.

How do I keep my trailer tires from dry rotting?

One method to avoid the heat and delay the occurrence of dry rot is to jack up your trailer tires when they are not in use to keep them from the ground. An alternative message is to position your wheels on thin plywood boards so the tires don’t have direct contact with the hot ground.

Should you balance trailer tires?

Since the primary duty of a trailer tire is supporting a vertical load, rather than gripping an automobile through turns, trailer tires do not have to be dynamically balanced like passenger car tires do. Steering and cornering are less of a concern on a trailer tire than they are on an automotive tire.

What is the difference between r13 and d13 tires?

The difference is that D stands for bias-ply and R stands for radial. The main difference between a radial ply and a bias ply tire is how the tire is constructed. A radial tire will normally run cooler than a bias ply tire, especially when the tire is under a load. A tire that runs cooler will last longer.

Why are trailer tires bias ply?

Bias ply tires have stiffer sidewalls, so if your rig tends to sway, they may help reduce this problem. They also have advantages for carrying heavy loads. Radials, as most of us know, are vastly superior for tread wear. However, oxidation, not tread wear, wears out trailer tires.

What does St stand for on trailer tires?

Special Trailer

What’s better load range D or E?

Expert Reply: Load range D has a capacity of 1,220 lbs at 65 psi, whereas load range E has a capacity of 1,520 lbs at 80 psi. Basically the only difference between the two is the weight capacity.

Are all LT tires 10 ply?

The cords in a LT tire are a larger gauge than P-metric tires so the tire can carry heavier loads. LT tires are usually 8-ply (Load Range D) or 10-ply (Load Range E). Passenger Tires usually have a 4-ply or 6-ply equivalent sidewall.

Will 10 ply tires last longer?

most 10 ply tires have a harder rubber compound and will last longer than a 6 ply tire.

Is Load Range E 10 ply?

Therefore load range simply tells how tough the tire is and the allowable PSI. For example, an ā€œEā€ load range indicates that a tire is equivalent to a 10-ply construction tire. In realitly, this tire is not built with 10 plies, but rather one or two plies of equivalent strength.

What is Load Range E?

The load range is identified by a letter of the alphabet, usually from A to F, which represents the ply rating and load pressure. A rating of “E” on the tire means the tire has a ply rating 10 and a load pressure of 80 psi.

How much weight can a Load Range E tire carry?

The P-metric Michelin is rated at 2,535 pounds at 44 psi and weighs 43 pounds. The LT Michelin is Load Range E, rated at 3,195 pounds at 80 psi and weighs 49 pounds, despite having less tread depth than the P-metric tire (12/32 inch versus 14/32).

What’s the difference between load range C and E?

Load range C, load range D, or load range E tires are capable of greater loads. Most load range C, D, and E tires are intended for light-truck applications. Extra Load-rated tires are limited to the load that can be carried at a maximum inflation pressure of 41 psi.