How do you program a hunter Indiglo thermostat?

Setting 44155c Thermostat Temperature Manually

Setting 44155c Thermostat Temperature Manually Let go of the arrow button as soon as the display begins flashing. Push the up or down arrow until the display shows the temperature you wish to attain in your home. Push “Hold/Return” again to exit the setting mode if you permanently overrode the settings.

how do you use a hunter touchscreen thermostat? How to Program Hunter Touchscreen Thermostats

  1. Touch the screen while it is in sleep/ready mode to turn on the Hunter thermostat.
  2. Tap the day that you want to set a program for on the screen.
  3. Touch the “Heat” or “Cool” icon to select the system you want to engage.
  4. Tap the temperature display to open up the temperature control arrows.

Subsequently, one may also ask, how do I reset my hunter 44860 thermostat?

Press and hold the Programs button, and at the same time press in the recessed Reset button with the tip of a ball point pen. Release the Reset button and continue holding the Programs button until the Reset Memory screen appears (then release the Programs button).

How do I override my hunter thermostat?

Hold down one of the UP/DOWN arrow keys until the display flashes. Use the arrow keys to move the temperature setting to the desired temperature. Press the HOLD/RETURN button. The thermostat will now hold the temperature at the setting until the override is cancelled.

How do I program a hunter 44360 thermostat?

Press “Hold/Return” to return to the main menu. Program a Day. Slide the system switch to “Heat” or “Cool” to program the desired setting and then press “Program”. Program the Rest of the Week. Overriding Hunter Thermostat 44360 Settings. Vacation Mode.

What does it mean when your thermostat says RE Co?

screen display flashes “re co”, what does that mean? 5 Auto recovery – allows heating and cooling systems to gradually recover from an energy-saving setpoint temperature to a comfort setpoint temperature. Auto recovery calculates the time needed to adjust the temperature to the next program setting.

How do I lock the temperature on my thermostat?

Start with the System Mode switch in either the HEAT or COOL positions, and the Set Slide switch in the RUN position. Press and hold the NEXT button for 5 seconds, and the words “LOCK CODE” then “SET CODE” will appear at the top of the screen. Select a 4-digit code that you would like to use for locking the thermostat.

How do I change my hunter thermostat from Celsius to Fahrenheit?

How to Change a Thermostat From Celsius to Fahrenheit Look for a “C/F” button on the front of your thermostat. Press the button to toggle between temperatures in degrees Celsius or degrees Fahrenheit. Enter your thermostat’s setup mode. Scroll through the settings until you find a Fahrenheit or Celsius mode option. Enter the “Installer Config” menu on your thermostat.

What is change span on thermostat?

Span. The span setting regulates when and how long your system will run. The span has been set at the factory to 0.5º (in Fahrenheit mode) which will allow the system to turn on 1ºF above or below the set temperature and run for 1ºF above or below the set temperature.

How do you set a Lux 1500 Thermostat?

How to Unlock a Lux 1500 Thermostat Press and release the “Next” button, in the center of the thermostat’s programming panel, three times. Press the “Hold” button, and then release it. The thermostat is unlocked. Press and release the “Next” button three times, and then press and release the “Hold” button to lock the thermostat again. Share this article.