How long is a standard railroad tie?

The standard length of a tie is 102 inches. In specialized cases they may be longer, to spread the weight of the rails over a greater surface area. Longer ties are used in areas where the ground is soft and the stability of the rails would otherwise be a concern.

The weight of a railroad tie depends on their size and specifications. They can range anywhere from 100 to 300 pounds. The majority of railroad ties weigh close to 200 pounds.

Likewise, are old railroad ties toxic? If the railroad ties are old, creosote may ooze out, leeching the soil and killing plants, insects and small animals. The arsenic in the wood is toxic, making it a danger to plants and wildlife that have prolonged contact with it. CCA- treated railroad ties should be disposed of through municipal means.

Similarly, are railroad ties illegal to use?

Every EPA site said the same thing about the main preservative in old railroad ties: “Creosote is a possible human carcinogen and has no registered residential use.” So it’s actually illegal to use old railroad ties in a home landscape. There are no approved residential uses of creosote treated wood.

How many railroad ties equal a mile?

(The spacing means the distance of the center of one tie to the center of the next tie, and equals to the width of one tie plus the width of one crib.) The number of ties is 3,250 wooden crossties per mile (2019 ties/km, or 40 ties per 65 feet) for wood ties or 2640 ties per mile for concrete ties.

How much does a railroad tie cost?

The tie is worth about $20. The sideboards may be $3-4 per log if it’s junky, maybe more if they are red oak #1 com or better. So if you can do 100 ties a day you can earn maybe $1100 a day before expenses.

Is it OK to use railroad ties for garden?

Using railroad ties for garden beds can pose a threat to your soil, pets and children, as well as the food you grow. The wood is preserved by soaking it in creosote, which is composed of over 300 chemicals, many of them toxic and persistent in soil. Exposure to creosote has been shown to cause cancer.

Do railroad ties attract termites?

Research also has shown that mulch-fed termites have significantly lower survivorship than those that feed on other wood materials. However, infested products such as railroad ties have the potential to spread a colony. Mulch does not attract termites.

How heavy is an 8 foot railroad tie?

They can range anywhere from 100 to 300 pounds. The majority of railroad ties weigh close to 200 pounds.

Can I pick up old railroad ties?

Railroad ties can be used to make retaining walls, parking lot bumpers, etc. Local organizations such as Habitat for Humanity may be able to utilize the railroad ties. If recycling of your railroad ties is not an option, they should be disposed of in a solid waste or construction and demolition debris landfill.

How much does a 9 railroad tie weigh?

A railroad tie weighs between 145 and 200 pounds, depending on the condition or grade of the tie. This weight is based upon the most common size of railroad tie in use today, according to the Railway Tie Association. The most common size of railroad tie is 9 inches wide, 7 inches tall and 8 1/2 feet long.

Why is creosote banned?

The European Commission has banned the sale of creosote-treated wood after it was found that there could be a cancer risk. Scientists carrying out a study for the commission have found that creosote is much more hazardous than originally thought. The ban takes effect from June 30, 2003.

What do railroads do with old ties?

Some railroad ties are sent to garden centers for use as landscape timbers. Old ties are sent off to be thrown out. Some end up in landfills, and some are burned at special power plants that have filtration to capture the creosote (the preserving agent that keeps the tie from rotting.)

Can railroad ties be used for a retaining wall?

And perhaps the easiest way to build such a wall is with used railroad crossties. As you know, ties are 6 x 8 feet x 8 inches (more or less) chunks of pine, redwood, or oak treated with wood preservatives (usually creosote but sometimes also pentachlorophenol).

Can I take railroad ties to the dump?

Yes, all landfills accept railroad ties. However, they must be permitted into each facility and can not be longer than 8 feet.

What can I use instead of railroad ties?

Alternatives to Railroad Ties Some of the naturally durable woods that can be used to replace the creosote-soaked logs are redwood, cedar, cypress and black locust. It is also possible to buy pressure-treated wood or to buy clear wood and treat the timbers yourself.

Do railroads own the land the tracks are on?

But, generally speaking, the railroads own the land on which their track is laid and a significant easement on each side of a couple-hundred feet.

What kind of wood is used to make railroad ties?

Railroad ties are usually hardwood – mostly oak, but I’ve heard of cedar being used when it was available, or in areas that were prone to flooding or general damp conditions. On lighter lines, cheaper woods like pine were used on the straight sections, and hardwoods were used on curves and switches.

Does Home Depot have railroad ties?

This genuine railroad tie work well for any number of landscaping and garden projects. However, these authentic used ties should not be expected to be defect-free on all four sides. Treated wood is typically still wet when it’s delivered to The Home Depot or job site.