What is 15 lb felt paper?

15-lb felt paper weighed 15 pounds per 100 sq. ft. (one roofing square) and 30-lb felt paper weighed 30 pounds per square. Felt paper is commonly produced with a certain number of recycled products and coated with asphalt.

Compare all Specifications

#30 Felt Roof Deck Protection #15 432 sq. ft. ASTM D226 Felt Underlayment
$25.75 /roll $25.75 /roll
(101) (0)
Roofing Product Type Felt Roofing Product Type Underlayment
Product Thickness (in.) .06 Product Thickness (in.) 0.0375

One may also ask, how long is a roll of 15 lb felt? It is sold in rolls of various widths, lengths, and thicknesses – 3-foot-wide (0.91 m) rolls, 50 or 100 feet (15 or 30 m) long and “15 lb” (7 kg) and “30 lb” (14 kg) weights are common in the U.S. – often marked with chalk lines at certain intervals to aid in laying it out straight on roofs with the proper overlap (

One may also ask, should I use 15 or 30 pound felt?

Weight Matters Asphalt-saturated heavy-duty roofing felt is available in 15– and 30pound weights. Besides that benefit, if shingles come loose during a storm and tear off, the 30pound roofing felt stays intact, whereas 15pound tar paper may not. This offers your home protection until you can repair it.

How many square feet does 15 lb felt cover?

Roofing comes in rolls 3 feet wide and 36 feet long, for a coverage of about 1 square. When installing roofing over bare wood, roofing felt — often called tar paper — is laid down first. A roll of 15-pound felt covers about 4 squares; a roll of thicker 30-pound felt covers 2 squares.

What is the thickest roofing felt?

Roofing Paper Thickness The most commonly used felts are #15 and #30, with weights of 8 and 20 pounds per 100 square feet, respectively. The most commonly used is #15, which comes in rolls 3 feet wide, is 144-feet long and covers approximately four squares per roll, or approximately 400 feet of roof.

What is roofing felt made of?

Roofing felt is comprised of a base, made from natural materials (such as wood cellulose) or synthetic ones (such as fiberglass or polyester), and then coated or saturated with a protective coating such as bitumen (asphalt), which repels water but still allows the product to breathe.

How much does a roll of 15 lb felt weigh?

By shifting the pound symbol, 15# felt became #15 felt, which may actually weigh 7.5 to 12.5 pounds per square; #30 felt can weigh between 16 and 27 pounds per square.

Is roofing felt waterproof?

Roofing felt (similar to tar paper) is the base material used to make roof shingles and roll roofing. Used for decades as waterproof coverings in residential and commercial roofs, these bitumen compositional membranes incorporate two layers.

How do you calculate roofing felt?

How to Calculate How Much Roofing Felt Is Needed? Roofing felt, commonly called tar paper, is an important component of any roofing system. Subtract the lower height measurement from the larger height measurement. Measure the length and width of the structure at ground level in feet. Multiply the result in step two by 1.10 to account for waste.

Is roofing felt necessary?

Answer: Roofing felt is a layer of tar paper installed beneath the shingles to provide a backup waterproof membrane in case of leakage. Felt, otherwise known as underpayment, is required when asphalt shingles are installed as a first layer of roofing or when they are applied over wood shingles or a built-up roof.

What are the different types of roofing felt?

There are three basic types of underlayment used beneath roofing materials: asphalt-saturated felt; rubberized asphalt; and. non-bitumen synthetic.

How much does roofing felt cost?

Cost of Roofing Felt Paper Roofing Felt Paper costs Zip Code Sq. ft. Basic Better Roofing Felt Paper – Material Prices $165.00 – $175.00 $190.00 – $210.00 Roofing Felt Paper – Installation Cost $220.00 – $240.00 $265.00 – $280.00 Roofing Felt Paper – Total $385.00 – $415.00 $455.00 – $490.00

Will roofing felt stop rain?

Roofing felt can get wet and still maintain its integrity, as long as it is not exposed to the elements for more than a few days. It will break down in sunlight and with large amounts of ongoing moisture. If the felt is still wet, it may rip when shingles are installed.

When should I use 30lb felt?

Most standard pitched roofs only need a 15lb. felt for proper underlayment. 30lb. is used for many specialty applications such as: low pitch roofs, steep roofs (pitches over 7 on twelve), flat areas to be roofed with roll roofing, and new construction.

What is the best roofing felt to buy?

Super Shed Felt / Polyester Reinforced Shed Felt This shed felt is considered by many experts as the best value for money. Super shed felt will normally outlast both standard and heavy duty felt.

Is 15 pound felt a vapor barrier?

Asphalt felt, Grade D paper and house wraps such as Tyvek® are moisture barriers and are air barriers if correctly installed, but they are not vapor retarders. of 15# asphalt felt or equivalent material behind most exterior wall coverings. These wall coverings require two layers of Grade D paper or equivalent material.

Does shingle weight matter?

Basic Shingle Construction The quality of asphalt shingles is in direct proportion to their weight per square (100 square feet). Heavier shingles (up to 350 pounds per square) generally last longer than the lighter shingles (200 pounds per square).

What is the minimum underlayment for asphalt shingles?

for asphalt shingles, NRCA recommends a single layer of no. 15 asphalt-saturated underlayment be used with roofs having slopes of 4:12 (18 degrees) or greater. for roof slopes between 3:12 (14 degrees) to 4:12 (18 degrees), NRCA recommends a minimum of two layers of no. 15 underlayment.